Our Work
Here are more lamps. They are numbers 89 - 101.
89
$335
Time for a little fun. This lamp has three flashing lights in the form of a stop light. Each one is controlled by its corresponding colored switch. You can have any combination of the three lights lit at any time. If you just want a clear steady light, this has that, too. It has its own matching color switch. This lamp is made with black pipe and a base made from old pallets. This one is just plain fun.
12"L x 10"D x 24"H
90
This lamp has sold.
Sit tight for this one. We have an Edison bulb controlled by its own switch. That can be on regardless of what else is going on with the lamp! We have a fire alarm that controls the flashing red light on the left. For a little fun, you can turn the switch below the flashing light to the AFC side and this will set off the alarm and panel light that are below the switch. Simply turning the switch to Bypass will turn the alarm and panel light off. Ah, peace and quiet. The lamp is black pipe with a diamond plate base wrapped in old pallet wood.
13"L x 10"D x 27"H
11"L x 14"D x 25"H
91
This lamp has sold.
Back to the clocks! I kept it simple with this one where we have a single light controlled by the single switch at the bottom. Black pipe wraps around the clock and keeps it in place, while still being accessible for battery changes and time adjustments. There is a metal tag in the back corner of the base. This is made with black pipe and has a diamond plate base wrapped in old pallet wood.
14"L x 14"D x 31"H
92
This lamp has sold.
So, it appears that I have a theme of flashing lights/noise going on. Can you blame me? Anyway, for this lamp, the left toggle switch under the amber cover operates the main light on top. The other toggle switch operates the flashing amber light on the right (they work independently of each other). What does the key do? It allows you to bypass the alarm that is located directly above it, if you want some peace and quiet. If not, just turn the key to the left and that will light the red panel light and set off the alarm! The base is an old pulley and the lamp is made from black pipe.
10"L x 10"D x 26"H
93
This lamp has sold.
What happens when you buy a transformer from an old railroad train set that was completely fried? You make it into a dimmer control for a steampunk lamp. It actually controls/dims the Edison bulb right above it. You have to lift the lid on the metal box on the right to find the rotary switch for the other light. Add three coordinating gauges and you have one amazing light. This is made from black pipe and the base is old pallet wood.
13"L x 11"D x 24"H
94
$350
I still really enjoy working with copper pipe and my soldering is still getting pretty darned good! Also, as promised, I have once again combined the copper pipe with the black pipe to make this lamp. The copper pipe has more twists and turns than five M. Night Shyamalan movies. A new addition to my lamps is the 6" copper dome on top that covers the light (it is operated by the switch in the middle). The dome really adds something (you decide what) to this lamp. Another new thing I tried is the metal that covers the top of the base. This really helps with the industrial/steampunk feel Three gauges round off this lamp.
12"L x 11"D x 27"H
95
$295
Another lamp this is a ton of fun in a small package. To say this lamp is simple (non-complex, if you will) may be an understatement. We have essentially three main pieces that make up this lamp, but that is more than enough! We have the explosion-proof light that is operated by the switch on the right. The gauge in front is the final piece and it goes so well with the red light and switch. It is made from black pipe and the base is repurposed pallet wood.
14"L x 10"D x 14"H
96
$395
The focus of this lamp is the old elevator control box in the middle. The key operates the Edison bulb above it and the switch on the bottom right operate the other light. They work independently. The orange switch in the middle operates the green and blue panel lights (turn the switch left to light the green light and to the right to light the blue one). This is made from 1/2" conduit with the base top being diamond plate wrapped in black pallet wood.
17"L x 11"D x 25"H
97
This lamp has sold.
As far as obvious statements go, the most obvious may be that the meter box in the middle is the focal point of this lamp (okay, a tad hyperbolic). The toggle switch lights a night light in the box when flipped to the left and operates the light on the left when flipped to the right. The red wheel in the middle is a dimmer switch that controls the light on top. You can't spell functional without fun! This is made from black pipe and the base has a metal top and is wrapped in old pallet wood.
13"L x 11"D x 23"H
98
This lamp has sold.
This lamp with a clock has been jazzed up by adding an oiler to it. What does an oiler have to do with a clock? Mechanically, nothing. However, they look great together in this lamp and that's all that counts. Simple and elegant. The switch in the middle operates the single light. This is made from black pipe and the base is black diamond plate wrapped in pallet wood.
13"L x 13"D x 29"H
99
$335
This is one of those lamps that deceptively took a long time to make. I wanted a nice clean look without having a junction box for the wiring in the way. So, I hid that below the top of the base (it's where the three switches are). Each of the three toggle switches has its own indicator light and each one operates its corresponding light, left to right. You can have any combination of the lights lit at any time. The insulators and silver gauges keep this a nice clean look. It is made with black pipe and the base is pallet wood.
15"L x 13"D x 26"H
101
This lamp has sold.
This compact lamp still gives out a good amount of light from its two led lights inside the insulators. There are two rotary switches at ninety degrees to each other that operate the light above it (they work independently). I added a metal tag to complete the base. Three coordinating gauges round out the look. This is made from black pipe and the base is old pallet wood.
9"L x 10"D x 18"H
